/*
090622 Igoumeninja Aris Bezas
"\n" maybe is the solution
 Controller
 */

int analog0 = 0, analog1 = 1, analog2 = 2, analog3 = 3, analog4 = 4, analog5 = 5;
int dig0 = 0, dig1 = 1, dig2 = 2, dig3 = 3, dig4 = 4, dig5 = 5, dig6 = 6, dig7 = 7, dig8 = 8, dig9 = 9, dig10 = 10, dig11 = 11, dig12 = 12, dig13 = 13;

int analogValue0 = 0, analogValue1 = 0, analogValue2 = 0, analogValue3 = 0, analogValue4 = 0, analogValue5 = 0;
int digValue0 = 0, digValue1 = 0, digValue2 = 0, digValue3 = 0, digValue4 = 0, digValue5 = 0, digValue6 = 0, digValue7 = 0, digValue8 = 0, digValue9 = 0, digValue10 = 0, digValue11 = 0, digValue12 = 0, digValue13 = 0;

void setup() { 
  Serial.begin(9600);
  pinMode(dig0, INPUT);     // declare pushbutton as input
  pinMode(dig1, INPUT);     // declare pushbutton as input
  pinMode(dig2, INPUT);     // declare pushbutton as input
  pinMode(dig3, INPUT);     // declare pushbutton as input
  pinMode(dig4, INPUT);     // declare pushbutton as input
  pinMode(dig5, INPUT);     // declare pushbutton as input
  pinMode(dig6, INPUT);     // declare pushbutton as input
  pinMode(dig7, INPUT);     // declare pushbutton as input
  pinMode(dig8, INPUT);     // declare pushbutton as input
  pinMode(dig9, INPUT);     // declare pushbutton as input
  pinMode(dig10, INPUT);     // declare pushbutton as input
  pinMode(dig11, INPUT);     // declare pushbutton as input
  pinMode(dig12, INPUT);     // declare pushbutton as input
  pinMode(dig13, INPUT);     // declare pushbutton as input

} 

void loop() { 
  // read analog values
  analogValue0 = analogRead(analog0);    // read the value from the Analog0
  analogValue1 = analogRead(analog1);    // read the value from the Analog0
  analogValue2 = analogRead(analog2);    // read the value from the Analog0
  analogValue3 = analogRead(analog3);    // read the value from the Analog0
  analogValue4 = analogRead(analog4);    // read the value from the Analog0
  analogValue5 = analogRead(analog5);    // read the value from the Analog0 

  //  read digital values
  digValue0 = digitalRead(dig0);  // read input value
  digValue1 = digitalRead(dig1);  // read input value
  digValue2 = digitalRead(dig2);  // read input value
  digValue3 = digitalRead(dig3);  // read input value
  digValue4 = digitalRead(dig4);  // read input value
  digValue5 = digitalRead(dig5);  // read input value
  digValue6 = digitalRead(dig6);  // read input value
  digValue7 = digitalRead(dig7);  // read input value
  digValue8 = digitalRead(dig8);  // read input value
  digValue9 = digitalRead(dig9);  // read input value
  digValue10 = digitalRead(dig10);  // read input value
  digValue11 = digitalRead(dig11);  // read input value
  digValue12 = digitalRead(dig12);  // read input value
  digValue13 = digitalRead(dig13);  // read input value

  //print digital values
  if (digValue0 == HIGH) {            // check if the dig0 is HIGH
    Serial.print("q");
     Serial.print("\n");
  }
  if (digValue0 == LOW) {            // check if the dig0 LOW
    Serial.print("0");
     Serial.print("\n");
  }
  if (digValue1 == HIGH) {            // check if the dig1 is HIGH
    Serial.print("w");
     Serial.print("\n");
  }
  if (digValue1 == LOW) {            // check if the dig1 is LOW
    Serial.print("1");
     Serial.print("\n");
  }
  if (digValue2 == HIGH) {            // check if the dig2 is HIGH
    Serial.print("e");
     Serial.print("\n");
  }
  if (digValue2 == LOW) {            // check if the dig2 is LOW
    Serial.print("2");
     Serial.print("\n");
  }
  if (digValue3 == HIGH) {            // check if the dig3 is HIGH
    Serial.print("r");
     Serial.print("\n");
  }
  if (digValue3 == LOW) {            // check if the dig3 is LOW
    Serial.print("3");
     Serial.print("\n");
  }
  if (digValue4 == HIGH) {            // check if the dig4 is HIGH
    Serial.print("t");
     Serial.print("\n");
  }
  if (digValue4 == LOW) {            // check if the dig4 is LOW
    Serial.print("4");
     Serial.print("\n");
  }
  if (digValue5 == HIGH) {            // check if the input is HIGH
    Serial.print("y");
     Serial.print("\n");
  }
  if (digValue5 == LOW) {            // check if the dig4 is LOW
    Serial.print("5");
     Serial.print("\n");
  }
  if (digValue6 == HIGH) {            // check if the input is HIGH
    Serial.print("u");
     Serial.print("\n");
  }
  if (digValue6 == LOW) {            // check if the dig4 is LOW
    Serial.print("6");
     Serial.print("\n");
  }

  if (digValue7 == HIGH) {            // check if the input is HIGH
    Serial.print("i");
     Serial.print("\n");
  }
  if (digValue7 == LOW) {            // check if the dig4 is LOW
    Serial.print("7");
     Serial.print("\n");
  }

  if (digValue8 == HIGH) {            // check if the input is HIGH
    Serial.print("o");
     Serial.print("\n");
  }
  if (digValue8 == LOW) {            // check if the dig4 is LOW
    Serial.print("8");
     Serial.print("\n");
  }

  if (digValue9 == HIGH) {            // check if the input is HIGH
    Serial.print("p");
     Serial.print("\n");
  }
  if (digValue9 == LOW) {            // check if the dig4 is LOW
    Serial.print("9");
     Serial.print("\n");
  }

  if (digValue10 == HIGH) {            // check if the input is HIGH
    Serial.print("a");
     Serial.print("\n");
  }
  if (digValue10 == LOW) {            // check if the dig4 is LOW
    Serial.print("l");
     Serial.print("\n");
  }

  if (digValue11 == HIGH) {            // check if the input is HIGH
    Serial.print("s");
     Serial.print("\n");
  }
  if (digValue11 == LOW) {            // check if the dig4 is LOW
    Serial.print("k");
     Serial.print("\n");
  }

  if (digValue12 == HIGH) {            // check if the input is HIGH
    Serial.print("d");
     Serial.print("\n");
  }
  if (digValue12 == LOW) {            // check if the dig4 is LOW
    Serial.print("j");
     Serial.print("\n");
  }

  if (digValue13 == HIGH) {            // check if the input is HIGH
    Serial.print("f");
     Serial.print("\n");
  }
  if (digValue13 == LOW) {            // check if the dig4 is LOW
    Serial.print("h");
     Serial.print("\n");
  }


  //  print analog values   z, x, c, v, b, n  0, 1, 2, 3, 4, 5
  Serial.print("z");  // analog0    
  Serial.print(analogValue0); 
     Serial.print("\n");// new line

  Serial.print("x");  // analog1    
  Serial.print(analogValue1); 
     Serial.print("\n"); 

  Serial.print("c");  // analog2    
  Serial.print(analogValue2); 
     Serial.print("\n");

  Serial.print("v");  // analog3    
  Serial.print(analogValue3); 
     Serial.print("\n");

  Serial.print("b");  // analog4    
  Serial.print(analogValue4); 
  Serial.print("\n");

  Serial.print("n");  // analog5    
  Serial.print(analogValue5); 
  Serial.print("\n");

}